Kubernetes home-lab via SBCs
Install Kubernetes using k3s on Raspberry PI, including ingress-nginx and cert-manager, setting reasonable defaults.
Install Kubernetes using k3s on Raspberry PI, including ingress-nginx and cert-manager, setting reasonable defaults.
Kubernetes, or k8s as some folks call it, is a container-based clustering piece of infrastructure.
Tesla is claiming their new semi will offer the lowest Total Cost of Ownership over current semi-tractors on the road today.
Short and simple script to add local users to VMware ESXi hosts via VMware Management Assistant version 6.0 or higher!
tl;dr: If you do not want to read the details. The 5.2.2 firmware changes ALL service to Protocol Number 6. The solution is navigate to Policy & Objects > Objects > Services > ALL and change Protocol Number to 0 (zero) Testing out a FortiWiFi 30D for placement at customer’s homes. Deployed our stock 5.0 configuration to the device and […]
VMware disables a major feature of ESXi – this is how you reenable it.
Attempting to setup a NetApp 3070 from scratch. What does that mean “from scratch”? It means the NetApp doesn’t have Ontap installed and just continually reboots. You’ll see something like this on the console. WARNING: there do not appear to be any disks attached to the system. Check that disks have been assigned ownership to this system (ID 118044872) using […]
Short and simple vMA scripts to configure SNMP on VMware ESXi systems including SNMP trap configuration.
Short and simple PowerCLI script to add local users to VMware ESXi hosts.